EARN 120% BITCOIN IN JUST 60 DAYS

Showing posts with label INTERNET SPEED BOOSTER. Show all posts
Showing posts with label INTERNET SPEED BOOSTER. Show all posts

The history of internet

Internet is an important part of life nowadays. We use it everyday but mostly dont know about its history. Here is the brief history of internet:

A single person did not create the Internet that we know and use today. Below is a listing of several different people who've helped contribute and develop the Internet.

The idea

The initial idea is credited as being Leonard Kleinrock's after he published his first paper entitled "Information Flow in Large Communication Nets" on May 31, 1961.

In 1962 J.C.R. Licklider becomes the first Director of IPTO and gave his vision of a galactic network. In addition to the ideas from Licklider and Kleinrock, Robert Taylor helped create the idea of the network, which later became ARPANET.

Initial creation

The Internet as we know it today first started being developed in the late 1960's.

In the summer of 1968, the Network Working Group (NWG) held its first meeting chaired by Elmer Shapiro with the Stanford Research Institute (SRI) with attendees: Steve Carr, Steve Crocker, Jeff Rulifson, and Ron Stoughton. In the meeting the group discussed solving issues related to getting hosts to communicate with each other.

In December 1968, Elmer Shapiro with SRI released a report "A Study of Computer Network Design Parameters." Based on this work and earlier work done by Paul Baran, Thomas Marill and others; Lawrence Roberts and Barry Wessler helped to create the final version of the Interface Message Processor (IMP) specifications. Bolt Beranek and Newman, Inc. (BBN) was later awarded the contract to design and build the IMP sub network.

Introduction of the Internet to the general public

UCLA puts out a press release introducing the public to the Internet on July 3, 1969.

First network equipment

August 29, 1969 the first network switch and the first piece of network equipment called "IMP", which is short for (Interface Message Processor) is sent to UCLA.  On September 2, 1969 the first data moves from UCLA host to the switch. In the picture to the right, is a picture of Leonard Kleinrock next to the IMP.

The first distributed message and network crash

On Friday October 29, 1969 at 10:30 p.m., the first Internet message was sent from computer science Professor Leonard KleinRock's laboratory at UCLA, after the second piece of network equipment was installed at SRI. This connection not only enabled the first transmission to be made, but is also considered to be the first Internet backbone.

The first message to be distributed was "LO", which was an attempt at "LOGIN" by Charley S. Kline to log into the SRI computer from UCLA. However, the message was unable to be completed because the SRI system crashed. Shortly after the crash, the issue was resolved and he was able to log into the computer.

E-mail is developed

Ray Tomlinson introduces network e-mail in 1972.  The first messaging system to send messages across a network to other users.

TCP is developed

Vinton Cerf and Robert Kahn design TCP during 1973 and later publish it with the help of Yogen Dalal and Carl Sunshine in December of 1974 in RFC 675.

First commercial network

A commercial version of ARPANET known as Telenet is introduced in 1974 and considered by many to be the first Internet Service Provider (ISP).

Ethernet is conceived

Bob Metcalfe develops Ethernet idea in 1973.

TCP/IP is created

In 1978 TCP splits into TCP/IP driven by Danny Cohen, David Reed, and John Shoch to support real-time traffic. This allows the creation of UDP. TCP/IP is later standardized into ARPANET in 1983 and is still the primary protocol used for the Internet.

DNS is introduced

Paul Mockapetris and Jon Postel introduce DNS in 1984.

HTML

In 1990 Tim Berners-Lee develops HTML, which made a huge contribution to how we navigate and view the Internet today.

WWW

Tim Berners-Lee introduces WWW to the public on August 6, 1991.

FACEBOOK ANYTIME ANYWHERE Without Internet

Fonet-Wish for FACEBOOK


Now , Anyone Can Access FACEBOOK form Anywhere Anytime Without Internet Connection.


If i can say i am using Facebook form MY NOKIA 1112
No one Can Believe ....

 Using FONET_WISH it is Possible to access facebook from Any mobile without internet connection.

How its work::

Fonetwish is an USSD based interactive service which brings the power of internet to every mobile phone. Fonetwish provides access to facebook from any mobile phone without the requirement of any data(internet) connection. Just dial *325# from your mobile phone and get started, fonetwish provides all the major features of facebook like status update, wall post, friend requests, notifications along with the above fonetwish provides push notifications an innovative new feature by which your facebook notifications are pushed into your mobile handset automatically as and when they are generated. So, the next time when you want to update your status or post on a friends’ wall no need to worry about overpriced SMS’s or a Data Connection. Just dial *325# from your mobile phone and get started.

IN SIMPLE ::

If u you have following operator in cellphone:

Airtel, Aircel, Idea, Videocon, Loop mobile , Tata Docomo and also in Uninor,

IN uninor and tatadocomo it is free in some number.

Just dial *325#


Post Your Message To All Facebook Groups In a Single Click

Hello friends..

Today i will show You a Trick By Which You can Able To Post Your message In All Or Selected Facebook Groups Of Your List In a Single Click.This Is a Small But Powerful Trick You Can Use This To promote Your Blog To All Facebook Groups.But Please Don't Misuse this Trick To Spam Alot.

So Lets Start The Trick..

STEP 1: Go To http://www.hexcolor.in/tools/multipost/

STEP 2: Login To Your Facebook Account By using Fconnect Button.After That You will See Something Like This.



http://techwarlock.blogspot.in/2012/06/post-your-message-to-all-facebook.html


STEP 3:  Put Your Message In "Your Message Field."...

You Can Also Able To Put Link To Any Site Which You Want To Post With Your Message By Pasting Its URL in "Post Link (URL)" Field.

If You Want To add Any Image With Your Message And Link Then You Can Do this By Pasting The URL of Image "Post Image Link (URL)" Or Alternatively You Can Upload A Picture From Your Computer.


STEP 4: After That Select The Groups Which You Want To Publish Your Post. If You Want To Publish Your Post To All Groups Then Click Mark On "Select All".

STEP 5: Finally Click On To "Fpost" Button At The Bottom of the Page To Post Your Message In All Groups..

Enjoy.. :)

Give Us A Company..Share This By Pressing Any Of The Button Below...

Update Windows Offline !!!




Microsoft frequently releases Security and other essential updates for windows.These updates fix newly discovered bugs and flaws and increases efficeny and protection of Windows.If you don’t have internet connection or have slow internet then you can’t get the updates directly from microsft instead you have to use a third party utlity calledAutopatcher.
AutoPacher allows you to download for your windows Operating system and saves it for offline installation.This gives you the liberty to update any computer without internet connection.

How to Update Windows OS Without Internet Connection:

  • Carry your Pen Drive and Go to your nearby Cyber Cafe then download Autopatcher software from here.
  • After downloading this software just install and run it.
  • It will prompt you to select the OS for which you want to download the updates and click on Next button.
  • Now Select your OS whether it is 32-bit or 64-bitsupported. If it is 32-bit then select X86 otherwise select X64 and click on Next button.
  • A list of all updates for your OS will be shown.
  • Select all the Updates and click on Download button.
  • After finishing the download just copy/paste all the downloaded updates in your Pen Drive.
  • Now insert this Pendrive into your system for which you have downloaded all these updates and install them.
That’s it! This is the best method to install the updates in Offline mode and secure your PC. This works for all windows OS (Window 7/Vista/XP).

How To Disable Timeline And Use Old Facebook [Firefox]

Facebook

We gave you a tutorial on how to use Facebook without Timeline on Chrome and now we are giving you the same for Mozilla Firefox. As we had an extension for Chrome we also have an extension for Firefox to switch User-Agent. This is also a client side thing and can be done on your computer . That means others will see your profile with the new interface but you can use the old Facebook for all the profiles. The steps are all the same and very easy and can be done by installing a simple add-on.

Steps To Use Facebook Without Timeline On Firefox:

1. Go to this link and install User-Agent Switcher For Firefox.
2. Once installed go to Tools –> Default User Agent –> Internet Explorer –> Internet Explorer 6.
( Use Internet Explorer 7 if chat is not working in Internet Explorer 6 )

Disable Facebook Timeline On Firefox
3. Now refresh your Facebook page and use Facebook without the Timeline.
Leave your comment if any of you had any problem.

Free Download Internet Download Manager 6.11 Build 7 Full Cracked

Internet Download Manager is being updated very quickly and more and more bugs are fixed to give you the best out of it. The new version has fixed a bug in integration module in Internet Explorer, Added the support for Mozilla Firefox version 14 and also added support for Sea Monkey 2.9 . So download the new version straightaway.




windows trick:Renaming start button in windows Xp

How to Rename Start Button in XP


You can rename your Windows XP ‘start’ button through registry or explorer.exe by changing some values. But there is lots of efforts to rename ‘start’ button through it.
There is a new and simple way to do that without playing with registry or explorer.exe.
A utility called StartBtn Renamer will do it for you.

just download the utility, type the text( you want to give to the start button) in New Lable section and click on ‘Rename It!’.
Your ‘start’ button text has been changed.
If you want more Windows XP Tips,Tricks and Hacks  bookmark our wedsite and daily use it.

WAZZUB – The Best Internet opprtunity

WAZZUB- Best Chance in The History Of Internet

Just take out your 2minutes time and read this whole blog

Earn money with Wazzub

Here is the best way to earn money Damn you don’t have to spend a single penny. Its FREE FOREVER.

Sign Up  (After Signing up it is IMPORTANT to verify your email ID. Check verification email in INBOX or SPAM FOLDER. Open email and click Confirmation link in the email )

Q: What is Wazzub?

WAZZUB is the world’s one and only Profit Sharing Phenomenon.
It is the first online community that shares its profits with its free pre-launch members
simply for choosing WAZZUB as their home page after launch. 
WAZZUB
 is always free for everyone.

Q:- What is Power of we?

It’s a fact: companies like Google or Facebook earn BILLIONS OF $$$ every quarter
just because we, the Internet users use their services.
It is time to understand, that we “the users” decide who is earning the big money.
If we together decide to use the services of a company that shares profits with us,
there is nothing that the other companies could do about it.

It’s so easy: the more users that join the WAZZUB Family for free,
the more money we “the users” will earn!

That is what we call the Power of “We”! 


Q:- Who owns and operates WAZZUB?    

WAZZUB is an international project that has been created by a handful of entrepreneurs and investors.
In September 2011 they founded GIT Global Investments, Inc. (GIT)
for the purpose of running WAZZUB and related businesses.
GIT is registered under the laws of Oregon. The Registration # is 802159-90.

Q:- Where is WAZZUB’s office?

GIT’s registered office is at 391 NW 179th Ave, Beaverton, OR 97006
and our WAZZUB headquarters is located at 7251 Lake Mead Blvd, Suite 364, Las Vegas, NV 89128.

 Q:- WAZZUB sounds too good to be true. Is WAZZUB a scam or is it a real business?

For sure WAZZUB is doing real business but it is no traditional business.
The Internet is changing the world and there is enough space for innovative business models
that have never been done before. WAZZUB is one of those business models.

For the first time ever a global online community is sharing its profits
with its pre-launch members. That is why we named it the first Profit Sharing Phenomenon.
Actually, WAZZUB is too good to pass up

Q:- Are You Sure This Isn’t A Wazzub Scam?

Since it’s free to join, you really don’t have much to lose.  What’s the worst that could happen?  I don’t want to be the one to tell you to get your hopes up but again, even if it’s a total flop, you won’t pay anything to join, so you don’t have to worry about losing any money. Remember, there was a time when Google was just an idea.  Everything has to start somewhere.  Heck, I’m always open to opportunity myself.  And after being approached by hundreds of people, I saw the potential this opportunity may hold as over 1 million people joined within the first weeks of pre-launch.

Q:- How does WAZZUB make money?

WAZZUB makes money in many different ways.
On April 9 we will launch a state-of-the-art website with patent-pending technology.
On this page we’ll display ads and special deals.
In fact, we do exactly the same as companies like Facebook, Google, AOL and Yahoo.
They offer free services and earn billions of $$$ just by displaying ads and special offers.
The only difference is that we share our profits with our pre-launch members.

Q:- How and when do the members get paid?

WAZZUB pays its members on a monthly basis.
Our first pay day will be May 15, 2012 for the month of April.
Small amounts will be paid by an online payment processor
and large amounts will be paid by check or bank wire.

However, WAZZUB is working on a simple global payment solution to best serve our world-wide community.

Q. Is it true that the members get paid US$1 per person in their 5 generations family?

There is no fixed amount that will be paid to all members.
During pre-launch, every member is building his personal $FACTOR
by inviting other members to join WAZZUB for free.
Each new member, 5 generations deep let your personal $FACTOR grow by 1.

After launch, the members’ $FACTORs are fixed and by adding them up
we receive the total amount of $FACTORs (= the global $FACTOR).
Each month we calculate WAZZUB’s profit and divide it by the global $FACTOR
to determine the actual multiplicator.
Example: Let’s say that the profit to be shared for the month of April is $4 million
and the global $FACTOR is 5 million.
Each member would earn $0.80 per personal $FACTOR
($0.80 x your personal $FACTOR = your income for that particular month)
If there would be $5 million to share, the multiplicator would be $1.00 and at $6 million it would be $1.20.
The more free members that set up WAZZUB as their home page after launch,
the more money the pre-launch members will earn.

JOIN NOW (After joining go to your email and verify your email. Also check your Spam Folder for Verification email – IMPORTANT)

Shutdown windows xp fast | speed up windows Xp shutdown






How to shutdown window xp faster 
When you shut down Windows XP, the OS tries its best to make sure that all services (they help run things like graphics, printers etc) are shut down. But there are times when they don't close, thus Windows XP tries to give it the chance to shut down itself. This amount of time that windows waits for the service to close is stored in the system registry. If you modify this setting, then windows will shut down the service earlier. To modify the setting, follow the directions below:


Then as under

1) Start – Run – Regedit
Navigate to the following Registry key:
HKEY CURRENT USER\Control Panel\Desktop
* Double click on the AutoEndTasks entry and replace the 0 with a 1 in the Value data text box
For the next two, if the dword value indicated does not exist, create it:
* Double click on the WaitToKillAppTimeout entry in the right pane and change the Value data to 2000
* Double click on the HungAppTimeout entry in the right pane and change the Value data to 1000
Reboot
* If still having a problem, make the next change:

2) HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
* Right-click on WaitToKillServiceTimeout and change it to 2000
NOTE :- The lowest value Windows will recognize is 1000 (1 second)More Tricks and Hacks ..
    Now reboot or restart your computer, You will be able to shutdown your window xp faster. 
    TRY AT YOUR OWN RISK...THIS ONLY EDUCATIONAL PURPOSE !!!!!

Reliance Plans To Offer 1Gb At 10rs 4G Service!!


According to an Economic Times report, Reliance Industries in keen to provide low-cost tablets powered by high-speed data services by the end of next year.

Reliance is planning to launch tablets at as low a price as Rs 3,500 bundled with a high-speed data offering of 1 GB at Rs 10, which the ET report says is about one-tenth of the current 3G prices.Infotel was the only entity to get pan-India licence in the auction of Broadband Wireless Access spectrum conducted by the government last year, and thus RIL now is the only company to have pan-India spectrum to offer wireless broadband services on the 4G technology platform having paid Rs 13,000 crore (Rs 130 billion) for these airwaves.

Media reports also state that Reliance plans to launch broadband Data service in about 700 Indian cities in the first phase, with data speeds ranging from 50 Mbps to 100 Mbps...

It is also learnt that Reliance is in the process of appointing merchants who would supply broadband equipment based on Qualcomm's Long-Term Evolution (LTE) technology so that it can roll out its wireless broadband service by the end of 2012.

Towards this end, the company is also said to be in talks with mobile tower firms to lease 26,000 towers across India for the ambitious launch.

RIL has a 95 per cent stake in Infotel Broadband Services which emerged as the sole successful bidder in all the 22 circles (pan-India) for the Broadband Wireless Access 4G Spectrum auction which was conducted by the Department of Telecom in June 2010. Global majors like Vodafone, Verizon and Telenor have deployed LTE networks in some developed markets.
Thank you to asifazam....for this post!!!
So Be Ready Guys To Use 4G of 1Gb Data at Only 10rs.

Free Android OS Secret codes




Hi friend if you are using Android os in you mobile and getting some problem for formatting,and other hardware problem then this post is very useful for you. Because in this trick you get all android secret code which is very useful for you peoples.

1. Factory Data Reset Code
*#*#7780#*#*

This code is used for a factory data reset. It’ll remove following things:

* Google account settings stored in your phone
* System and application data and settings
* Downloaded applications
* It’ll not Remove:
* Current system software and bundled application
* SD card files e.g. photos, music files, etc.


2. Completely Format Android Phone

*2767*3855#

* It will remove all files and settings including the internal memory storage and also reinstall the phone firmware.


3. All Details About your Phone

*#*#4636#*#*

This code can be used to get all details about your phone and battery. It shows following 4 menus on screen:

* Phone information
* Battery information
* Battery history
* Usage statistics


4. Codes to get Firmware version information

*#*#44336#*#* – PDA, Phone, CSC, Build Time, Changelist number

*#*#4986*2650468#*#* – PDA, Phone, H/W, RFCallDate

*#*#1234#*#* – PDA and Phone

*#*#1111#*#* – FTA SW Version

*#*#2222#*#* – FTA HW Version5. Codes to launch various Factory Tests

*#*#0*#*#* – LCD test

*#*#0673#*#* – Melody test

*#*#0842#*#* – Device test (Vibration test and BackLight test)

*#*#2663#*#* – Touch screen version

*#*#2664#*#* – Touch screen test

*#*#0588#*#* – Proximity sensor test

*#*#3264#*#* – RAM version

*#*#0283#*#* – Packet Loopback
6. Service Mode

*#*#197328640#*#*

This code can be used to enter into Service mode. You can run various tests and change settings in the service mode.
7. Bluetooth,WLAN and GPS Test Codes:

*#*#232331#*#* – Bluetooth test

*#*#232337#*# – Shows Bluetooth device address

*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* – WLAN test

*#*#232338#*#* – Shows WiFi MAC address

*#*#1472365#*#* – GPS test

*#*#1575#*#* – Another GPS test8. Phone Camera Update

*#*#34971539#*#*

This code is used to get information about phone camera. It shows following 4 menus:

* Update camera firmware in image (Try this option at your risk)
* Update camera firmware in SD card
* Get camera firmware version
* Get firmware update count

Transform Windows 7 To Mac OS

HERE I FOUND ONE AMAZING CUSTOMIZATION OF WINDOWS 7 TO COMPLETE MAC OS WITH ONLY ONE PACK JUST VISIT OUR PATNER SITE BY CLICKING HERE

And enjoy.......

Twiends Hack - To Automatically Follow People [Twitter]


We told you about Twiends – a service that can be used to increase your Twitter followers. So now with this article we are going one step ahead of it . We are basically going to provide you with a script that can be used to automatically follow other people. In the previous article you yourself had to follow each and every person to increase your seed count but with this script you will automatically follow other people with just a single click.

Steps To Automatically Follow Other People On Twiends Or In General Called The Twiends Hack :

The Script :

javascript:/* nemsis 4 bhw */ function tr_f() { var followlinks = []; for (var i=0; i < document.links.length; i++) {if (document.links[i].getAttribute("class")=="follow"){followlinks[followlinks.length] = document.links[i];}} /* nemsis 4 bhw */ for (var i=0; i

b) Copy the given script into the box in front of “ URL: ” and give it any name , say , Twiends Script.


So , till here you have made a bookmarklet with the Twiends Script .

2. Now go to Twiends and login with your twitter id and password.


When you see a screen which shows other tweeps you can follow then click the bookmarklet and you will see that you automatically start following other people. When all the people on that page will be followed then you can press the reload button and again click the bookmarklet. So with this script you can easily follow any number of people with get ease and as a result can increase your Twitter follower count tremendously.

Speed and Boost your XP's performance

Since defragging the disk won't do much to improve Windows XP performance, here are 23 suggestions that will. Each can enhance the performance and reliability of your customers' PCs. Best of all, most of them will cost you nothing.
1.) To decrease a system's boot time and increase system performance, use the money you save by not buying defragmentation software -- the built-in Windows defragmenter works just fine -- and instead equip the computer with an Ultra-133 or Serial ATA hard drive with 8-MB cache buffer.

2.) If a PC has less than 512 MB of RAM, add more memory. This is a relatively inexpensive and easy upgrade that can dramatically improve system performance.

3.) Ensure that Windows XP is utilizing the NTFS file system. If you're not sure, here's how to check: First, double-click the My Computer icon, right-click on the C: Drive, then select Properties. Next, examine the File System type; if it says FAT32, then back-up any important data. Next, click Start, click Run, type CMD, and then click OK. At the prompt, type CONVERT C: /FS:NTFS and press the Enter key. This process may take a while; it's important that the computer be uninterrupted and virus-free. The file system used by the bootable drive will be either FAT32 or NTFS. I highly recommend NTFS for its superior security, reliability, and efficiency with larger disk drives.

4.) Disable file indexing. The indexing service extracts information from documents and other files on the hard drive and creates a "searchable keyword index." As you can imagine, this process can be quite taxing on any system.

The idea is that the user can search for a word, phrase, or property inside a document, should they have hundreds or thousands of documents and not know the file name of the document they want. Windows XP's built-in search functionality can still perform these kinds of searches without the Indexing service. It just takes longer. The OS has to open each file at the time of the request to help find what the user is looking for.

Most people never need this feature of search. Those who do are typically in a large corporate environment where thousands of documents are located on at least one server. But if you're a typical system builder, most of your clients are small and medium businesses. And if your clients have no need for this search feature, I recommend disabling it.

Here's how: First, double-click the My Computer icon. Next, right-click on the C: Drive, then select Properties. Uncheck "Allow Indexing Service to index this disk for fast file searching." Next, apply changes to "C: subfolders and files," and click OK. If a warning or error message appears (such as "Access is denied"), click the Ignore All button.

5.) Update the PC's video and motherboard chipset drivers. Also, update and configure the BIOS. For more information on how to configure your BIOS properly, see this article on my site.

6.) Empty the Windows Prefetch folder every three months or so. Windows XP can "prefetch" portions of data and applications that are used frequently. This makes processes appear to load faster when called upon by the user. That's fine. But over time, the prefetch folder may become overloaded with references to files and applications no longer in use. When that happens, Windows XP is wasting time, and slowing system performance, by pre-loading them. Nothing critical is in this folder, and the entire contents are safe to delete.

7.) Once a month, run a disk cleanup. Here's how: Double-click the My Computer icon. Then right-click on the C: drive and select Properties. Click the Disk Cleanup button -- it's just to the right of the Capacity pie graph -- and delete all temporary files.

8.) In your Device Manager, double-click on the IDE ATA/ATAPI Controllers device, and ensure that DMA is enabled for each drive you have connected to the Primary and Secondary controller. Do this by double-clicking on Primary IDE Channel. Then click the Advanced Settings tab. Ensure the Transfer Mode is set to "DMA if available" for both Device 0 and Device 1. Then repeat this process with the Secondary IDE Channel.

9.) Upgrade the cabling. As hard-drive technology improves, the cabling requirements to achieve these performance boosts have become more stringent. Be sure to use 80-wire Ultra-133 cables on all of your IDE devices with the connectors properly assigned to the matching Master/Slave/Motherboard sockets. A single device must be at the end of the cable; connecting a single drive to the middle connector on a ribbon cable will cause signaling problems. With Ultra DMA hard drives, these signaling problems will prevent the drive from performing at its maximum potential. Also, because these cables inherently support "cable select," the location of each drive on the cable is important. For these reasons, the cable is designed so drive positioning is explicitly clear.

10.) Remove all spyware from the computer. Use free programs such as AdAware by Lavasoft or SpyBot Search & Destroy. Once these programs are installed, be sure to check for and download any updates before starting your search. Anything either program finds can be safely removed. Any free software that requires spyware to run will no longer function once the spyware portion has been removed; if your customer really wants the program even though it contains spyware, simply reinstall it. For more information on removing Spyware visit this Web Pro News page.

11.) Remove any unnecessary programs and/or items from Windows Startup routine using the MSCONFIG utility. Here's how: First, click Start, click Run, type MSCONFIG, and click OK. Click the StartUp tab, then uncheck any items you don't want to start when Windows starts. Unsure what some items are? Visit the WinTasks Process Library. It contains known system processes, applications, as well as spyware references and explanations. Or quickly identify them by searching for the filenames using Google or another Web search engine.

12.) Remove any unnecessary or unused programs from the Add/Remove Programs section of the Control Panel.

13.) Turn off any and all unnecessary animations, and disable active desktop. In fact, for optimal performance, turn off all animations. Windows XP offers many different settings in this area. Here's how to do it: First click on the System icon in the Control Panel. Next, click on the Advanced tab. Select the Settings button located under Performance. Feel free to play around with the options offered here, as nothing you can change will alter the reliability of the computer -- only its responsiveness.

14.) If your customer is an advanced user who is comfortable editing their registry, try some of the performance registry tweaks offered at Tweak XP.

15.) Visit Microsoft's Windows update site regularly, and download all updates labeled Critical. Download any optional updates at your discretion.

16.) Update the customer's anti-virus software on a weekly, even daily, basis. Make sure they have only one anti-virus software package installed. Mixing anti-virus software is a sure way to spell disaster for performance and reliability.

17.) Make sure the customer has fewer than 500 type fonts installed on their computer. The more fonts they have, the slower the system will become. While Windows XP handles fonts much more efficiently than did the previous versions of Windows, too many fonts -- that is, anything over 500 -- will noticeably tax the system.

18.) Do not partition the hard drive. Windows XP's NTFS file system runs more efficiently on one large partition. The data is no safer on a separate partition, and a reformat is never necessary to reinstall an operating system. The same excuses people offer for using partitions apply to using a folder instead. For example, instead of putting all your data on the D: drive, put it in a folder called "D drive." You'll achieve the same organizational benefits that a separate partition offers, but without the degradation in system performance. Also, your free space won't be limited by the size of the partition; instead, it will be limited by the size of the entire hard drive. This means you won't need to resize any partitions, ever. That task can be time-consuming and also can result in lost data.

19.) Check the system's RAM to ensure it is operating properly. I recommend using a free program called MemTest86. The download will make a bootable CD or diskette (your choice), which will run 10 extensive tests on the PC's memory automatically after you boot to the disk you created. Allow all tests to run until at least three passes of the 10 tests are completed. If the program encounters any errors, turn off and unplug the computer, remove a stick of memory (assuming you have more than one), and run the test again. Remember, bad memory cannot be repaired, but only replaced.

20.) If the PC has a CD or DVD recorder, check the drive manufacturer's Web site for updated firmware. In some cases you'll be able to upgrade the recorder to a faster speed. Best of all, it's free.

21.) Disable unnecessary services. Windows XP loads a lot of services that your customer most likely does not need. To determine which services you can disable for your client, visit the Black Viper site for Windows XP configurations.

22.) If you're sick of a single Windows Explorer window crashing and then taking the rest of your OS down with it, then follow this tip: open My Computer, click on Tools, then Folder Options. Now click on the View tab. Scroll down to "Launch folder windows in a separate process," and enable this option. You'll have to reboot your machine for this option to take effect.

23.) At least once a year, open the computer's cases and blow out all the dust and debris. While you're in there, check that all the fans are turning properly. Also inspect the motherboard capacitors for bulging or leaks. For more information on this leaking-capacitor phenomena, you can read numerous articles on my site.


Following any of these suggestions should result in noticeable improvements to the performance and reliability of your customers' computers. If you still want to defrag a disk, remember that the main benefit will be to make your data more retrievable in the event of a crashed drive.

Change the Location Of 'My Documents'

I just found out about this today, and I use Windows XP for some time now, so i guess there are others out there who don't know about this yet.

But normally windows saves the "My Documents" folder on your C-drive. But when you right-click on it and go to properties, you can change the location where you want windows to save your Documents folder.
I have a partition set up with just windows on it, and all my things i want to keep are on different partitions/disks. So now I put My Documents on another partition than where I have windows installed. If windows screws up and you have to format your C-drive again, your documents will be spared at least...

How To Delete An "undeletable" File

Open a Command Prompt window and leave it open.
Close all open programs.
Click Start, Run and enter TASKMGR.EXE
Go to the Processes tab and End Process on Explorer.exe.
Leave Task Manager open.
Go back to the Command Prompt window and change to the directory the AVI (or other undeletable file) is located in.
At the command prompt type DEL where is the file you wish to delete.
Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell.
Close Task Manager.


Or you can try this

Open Notepad.exe

Click File>Save As..>

locate the folder where ur undeletable file is

Choose 'All files' from the file type box

click once on the file u wanna delete so its name appears in the 'filename' box

put a " at the start and end of the filename
(the filename should have the extension of the undeletable file so it will overwrite it)

click save,

It should ask u to overwrite the existing file, choose yes and u can delete it as normal.


Here's a manual way of doing it. I'll take this off once you put into your first post zain.

1. Start
2. Run
3. Type: command
4. To move into a directory type: cd c:\*** (The stars stand for your folder)
5. If you cannot access the folder because it has spaces for example Program Files or Kazaa Lite folder you have to do the following. instead of typing in the full folder name only take the first 6 letters then put a ~ and then 1 without spaces. Example: cd c:\progra~1\kazaal~1
6. Once your in the folder the non-deletable file it in type in dir - a list will come up with everything inside.
7. Now to delete the file type in del ***.bmp, txt, jpg, avi, etc... And if the file name has spaces you would use the special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in the specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to type in the correct extension.

TEST YOUR PEN DRIVE SPEED........

Friends,

You can now test your Pen drive speed.

For Visit CLICK HERE

Download their USB flash benchmark application

for download CLICK HERE

You must be online connected to the Internet when speedtest is going on..

Now connect your pen drive and run this application.

Select correct path of pendrive and run start benchmark.



Now takes some time depends upon your Pen drive size...upto 15 minutes to half an hour.
( Don't stop when test is going on...otherwise it effects on your pen drive)

After completed speedtest they will give you a report link of your pen drive speedtest.

Go to that link and check that how faster is your pen drive..


Note:- For better and accurate results, It recommends that that you all have usb 2.0 usb port.


Good Luck...

Test your Pen drive now....

Amazing Internet Speed Booster (100% works)

Dramatically speed up to 45% your existing Internet connection and get the best performance possible from your current Internet access. No technical questions; just one click and it’s done. Free Internet speed test software included.. Full Speed will increase your online Internet speed with everything you do: faster downloads, web browsing, data streaming, e-mail. P2P and gaming.
Features:

* Faster Internet access
* Faster download speeds

* Faster web site browsing performance
* Improve Internet and Intranet performance
* Quicker data download times
* Improved streaming music and movies
* Faster download for songs and video
* Faster performance with email
* Better download speed for all data
* Faster loading Web graphics
* Speed test for Web site browsing
* Speed test for general data transfer

Tested over:
1. T1, T3, Cable, DSL - SDSL, ADSL
2. VPN and direct wired WAN/LAN
3. P2P, Remote Desktop, File Sharing Software


Download



http://rapidshare.com/files/255235160/Full_Speed_Internet_Broadband_Connection_v3.rar
 

© 2012 H@Ck tHe wOrLd - Designed by rAj | ToS | Privacy Policy | Sitemap

Join me On Facebook | Contact Us | Write For Us